|
|
|
|
|
|
Before Installing a FullStop Make Sure You Understand the Measurement Point The indicator pops up when the wetting front has moved about 10 cm below the rim of the funnel, labeled "0" in the diagram on the right. The position of the locking ring is the approximate depth of measurement. |
  |
|
|
After Installation Check the Depth of the Detector Look for ring on extension tube. From the ring to the depth of measurement is 30 cm (for 2 extension tubes) or 60 cm (3 extension tubes). Use yellow indicator for shallow detector and red indicator for deep detector. |
|
Previous Page:
