Home | Overview | News | Purchasing FullStop | Your Feedback | Contact Us FullStop Logo

We encountered very occasional problems with the indicator failing to latch in the up position. This occurs if the magnet located in the inside of the cap breaks free from its mounting. The indicator can be disassembled, by pulling off the small, black top piece. The top magnet can then be glued back into position.

The diagram shows a cross section of the indicator cap. One magnet is in the top of the cap and the other on the red indicator stalk.

arrow  Previous Page:
 Blocked Extraction Tube

Top arrow

Next Page:  arrow
Understanding Soil Water